DC Timer for DC Water Pump

Working voltage: 8-30 volt, working current: 0-5 ampere

There are two buttons and three digital tubes in total.

1. The left digital tube indicates cycle days, you can set 1-9 days.
2. Center digital tube indicates working times during each loop, you can set 1-9 times during one loop. They will be averaged during one loop.
3. The right digital tube indicates working minutes at each time. You can set 1-9 minutes at each time.

Press the “Select” button to choose the digital tube, press the “Setting” button to set exact content 1-9.

For example, we want the pump to work 8 times during 9 days, and working 7 minutes every time. We should follow the instructions below:

• Press the “Select” button once, left digital tube flash, press the “Setting” button to “9”
• Press the “Select” button twice, center digital tube flash, press the “Setting” button to “8”
• Press the “Select” button three times, right digital tube flash, press the “Setting” button to “7”

All done! Final display as following: